PARTS FOR PARSONS, DIGSALL & SEAMAN TRENCHERS USING 2.00"PITCH CHAIN
CARBIDE CUTTERS (BULLET BIT TYPE)
136036 4” RIGHT Cut Side Mount
Bullet Bit Holder $28.90
136037 4” LEFT Cut Side Mount
Bullet Bit Holder $28.90
136038 5” RIGHT Cut Side Mount
Bullet Bit Holder $28.90
136039 5” LEFT Cut Side Mount
Bullet Bit Holder $28.90
136040 6” RIGHT Cut Side Mount
Bullet Bit Holder $28.90
136041 6” LEFT Cut Side Mount
Bullet Bit Holder $28.90
Bullet bits not included with sidmounts
765CBFP Cap Carbide Bit with Flare $9.95
Puller Groove & Wedding Band
CARBIDE CUTTERS (SHARK STYLE)
$31.52
136236 SHARK SIDEMOUNT CENTER
4" CUT R/H
136237 SHARK SIDEMOUNT CENTER
4" CUT L/H
136238 SHARK SIDEMOUNT
5" CUT L/H
136239 SHARK SIDEMOUNT
5" CUT R/H
136240 SHARK SIDEMOUNT
6" CUT R/H
136241 SHARK SIDEMOUNT
6" CUT L/H
CHAIN REPAIR PARTS
CHRL200 REPAIR LINK (INC 2 PINS)
$33.23 FOR THE 2 PITCH CHAIN 137202H $25.10 CONNECTOR LINK
137203 $15.30 ROLLER LINK 135351 $4.95 CHAIN PIN (WITH KEY)
Fax 877-255-7781
BARE CHAIN & DIGGING CHAIN ASSEMBLIES
The welded Shark Tooth Chain is a maintenance free low profile chain assembly. The carbide tipped shark tooth will outlast the chain. Tension Adjustment is the only maintenance required. A great chain for digging HARD ROCK, CALICHE, CORAL, AND LIMESTONE.
Lowest Cost trencher chain. Use in the easiest of digging conditions such as SAND, SANDY LOAM, LOOSE SHALE, LOOSE SOIL, AND STICKY CLAY.
Low-cost trencher chain. Best for trenching SAND, SANDY LOAM, LOOSE SHALE, LOOSE SOIL, CALICHE, AND CLAY.
This 50/50 chain configuration allows for trenching in almost any type of ground. The carbide tipped replaceable bullet bits are bolted to the chain and used to break up the ground. The cup teeth follow to clean the trench. Use on LOOSE DIRT, MEDIUM, AND HARD ROCKY SOIL.
This 50/50 chain configuration allows for trenching in almost any type of ground. The non-replaceable Shark Tooth will outlast the chain. The cup teeth follow the Shark Tooth to clean the trench. Use on LOOSE DIRT, MEDIUM, AND HARD ROCKY SOIL.
The bolt-on rock and frost chain are used on HARD ROCKY CONDITIONS AND FROZEN GROUND. This chain uses replaceable carbide tipped bullet bits to pick and fracture hard rock and frozen ground.
FIND
on this page
CALL
800-447-1941
TO OBTAIN CURRENT PRICING ON DIGGING CHAIN
CALL
800-447-1941
TO OBTAIN CURRENT PRICING ON DIGGING CHAIN
CARBIDE DIGGING TEETH
CUP TEETH
(1/2" bolts, 2" on center)
135925 CUP TOOTH R/H $6.44 135924 CUP TOOTH L/H $6.44
DIGGING TEETH
PARSONS
Using 2.00" Pitch Chain
TRENCHER DIGGING PARTS FOR
REPLACEMENT DIGGING PARTS LLC
| ||||||
4 PITCH SPACING - 2" CUP TOOTH CHAIN 6" CUT
2" PITCH BARE CHAIN
2" PITCH CUP TOOTH CHAIN 6" CUT
*BOLTED CHAINS ALLOW FOR A WIDER TRENCH
2" PITCH 50/50 COMBO CHAIN 6" CUT
(CARBIDE TIPPED BULLET BITS & CUP TOOTH)
THIS IS OUR BEST-SELLING CHAIN
2" PITCH 50/50 COMBO CHAIN 6" CUT
(CARBIDE TIPPED SHARK TEETH & CUP TOOTH)
2" PITCH SHARK TOOTH WELDED CHAIN 6" CUT
2" PITCH ALL ROCK & FROST CHAIN 6" CUT
(CARBIDE TIPPED BULLET BITS)
800-447-1941
FREIGHT ONLY $35.00
UP TO 50LBS.
ONLINE ONLY
| ||||||
